PRODUCT COMPARISON
If you will need more help, don’t hesitate to contact us and we will help you to pick up the perfect solution for your needs.
Hardness 1 | Impact resistance | Heat resistance 2 | Flexibility 3 | Ease of 3D printing 4 | Resistance to load | Weather resistance | Post-processing 5 | Wear & abrasion resistance | Trans- parency 6 | Density 7 | Matte surface | Electrical insulation | Low moisture absorption | Food contact compliance | Low fume release | ||
Fillamentum | ABS | +++ | ++ | ++++ | + | ++ | ++ | ++ | ++++ | + | no | + | no | +++ | yes | no | no |
ASA | ++ | +++ | ++++ | ++ | +++ | ++ | ++++ | ++++ | + | no | + | yes | +++ | yes | no | no | |
CPE HG100 | ++++ | ++++ | +++ | + | ++++ | +++ | +++ | ++++ | +++ | yes | +++ | no | ++ | no | yes | yes | |
HIPS | ++ | ++ | ++++ | ++ | +++ | ++ | ++ | ++++ | ++ | trl | + | yes | ++++ | yes | yes | no | |
PLA | ++++ | + | + | + | ++++ | ++ | + | +++ | + | yes | +++ | no | ++ | no | yes | yes | |
PLA Crystal Clear | ++++ | + | + | + | ++++ | ++ | + | +++ | + | yes | +++ | no | ++ | no | yes | yes | |
Timberfill® | ++++ | + | + | + | +++ | ++ | + | ++++ | + | no | +++ | yes | ++ | no | no | yes | |
Fillamentum ESSENTIAL | PETG | +++ | ++ | ++ | + | ++++ | ++ | ++ | ++++ | ++ | yes | +++ | no | ++ | no | yes | yes |
Fillamentum forNATURE | NonOilen® | ++ | + | +++++ | ++ | ++++ | +++ | ++ | +++ | ++ | no | +++ | no | ++ | yes | yes | yes |
Fillamentum INDUSTRIAL | CPE CF112 Carbon | ++++ | + | ++++ | + | ++++ | ++++ | +++ | ++ | +++ | no | ++ | yes | ++ | no | no | yes |
Fluorodur | ++++ | ++ | ++++++ | + | + | ++++ | ++++ | ++ | ++++ | no | ++++ | no | ++++ | yes | no | no | |
Flexfill PEBA 90A | + | ++++ | ++++ | ++++ | +++ | ++ | + | + | +++ | yes | + | no | ++ | no | yes | yes | |
Flexfill TPE 90A | + | ++++ | +++ | ++++ | ++ | + | +++ | + | +++ | no | ++ | yes | +++ | yes | yes | yes | |
Flexfill TPE 96A | + | ++++ | ++++ | +++ | +++ | + | +++ | + | +++ | no | ++ | yes | +++ | yes | yes | yes | |
Flexfill TPU 92A | + | ++++ | +++ | ++++ | ++ | + | + | ++ | +++ | yes | +++ | no | ++ | no | no | no | |
Flexfill TPU 98A | + | ++++ | ++++ | +++ | +++ | + | +++ | ++ | +++ | yes | +++ | no | ++ | no | no | no | |
Nylon AF80 Aramid | ++++ | + | ++++++ | + | +++ | ++++ | + | + | +++++ | no | + | yes | +++ | no | no | yes | |
Nylon CF15 Carbon | ++++ | + | ++++++ | + | ++ | ++++ | ++ | ++ | ++++ | no | + | yes | +++ | no | no | yes | |
Nylon FX256 | +++ | ++ | ++++++ | ++ | ++ | +++ | ++ | ++ | ++++ | trl | + | no | +++ | no | yes | yes | |
PC/ABS | ++++ | +++ | +++++ | + | ++ | +++ | ++ | ++++ | +++ | no | + | no | +++ | no | no | no | |
PP 2320 | +++ | ++ | ++++ | ++ | + | +++ | +++ | ++ | +++ | trl | + | yes | +++ | yes | yes | yes | |
Vinyl 303 | ++++ | +++ | ++ | + | +++ | +++ | + | +++ | +++ | no | ++++ | no | ++++ | yes | no | no |
Food contact declaration per request.
Notes for property:
1. Hardness is property of surface. It doesn’t describe mechanical behaviour of the bulk
2. Heat resistance: ++++++ < 140 °C, +++++ < 115 °C, ++++ < 100 °C, +++ < 80 °C, ++ < 70 °C, + < 50 °C; also influenced by load and environment
3. Flexibility: ++++ flexible, + rigid
4. Ease of 3D printing: ++++ easy printing, + difficult to optimize
5. Post-processing: ++++ possible to paint, smooth, sand or glue
6. Transparency: yes = transparent, trl = translucent, no = non-translucent
7. Density: ++++ up to 1,35 g/cm3, + from 0,96 g/cm3